Radial Arm Drill Press logo

Radial Arm Drill Press

Call Toll Free @ 800-575-2843
Radial Arm Drill Press logo
Standard Radial
Arm Drill Presses
Medium Radial Arm Drill Presses Heavy Duty Radial
Arm Drill Presses
All Drill
Radial Arm
Drills Accessories
Radial Arm
Drills User Guides
Parts &
Operation Manuals

Model CLC 2500 Radial Arm Drill Presss

Standard Features

  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
  • Coolant system
  • CSA Electrics Standard
  • Tool kit and manuals
PDF Version
Model CLC 2500 Radial Arm Drill Press
Model CLC 2500 Radial Arm Drill Press
Specifications & Dimensions
Specifications and Dimensions
Model CLC2500
Working Area Drill Head
Column Sleeve Dia. (E) 21.65" (550mm) Spindle Taper 6MT
Column Face to Spindle Center Spindle Stroke 17.7" (450mm)
  Maximum (D+C) 98.4" (2500mm) Quill Diameter 3.94" (100mm)
  Minimum (D) 19.7" (500mm) Number of Spindle Speeds 16
Spindle Head Travel (C) 78.7" (2000mm) Spindle Speeds (rpm) 16-1250
Base Surface to Spindle End Number of Steps 16
  Maximum (A) 78.7" (2000mm) Spindle Feed Rate (in(mm)/rev.) 0.0015"(.04mm)-0.126"(3.20mm)
  Minimum (B) 21.6" (550mm) Spindle Drive Motor (2-speed) 10 hp (7.5 Kw)
Arm Vertical Travel (A-B) 39.4" (1000mm) Elevating Motor 5 hp (3.6 Kw)
Arm Rotation (Right & Left) 180 Coolant Pump Motor 1/4 hp (.18 Kw)
Baseplate Working Surface 86.8" x 43.4" (2205 x 1102mm)  
Box Table Area Capacities
  Length (L) 39.4" (1000mm) Drilling In Steel 3.15" (80mm)
  Width (K) 31.5" (800mm) Drilling In Cast Iron 3.98" (100mm)
  Height (H) 22" (560mm) Tapping In Steel 2.56" (65mm)
Base Dimensions Tapping In Cast Iron 2.95" (75mm)
Floor Area (R x S) 138.6" x 55.1" (3520 x 1400mm) Boring In Steel 6" (150mm)
Height (Q) 12.6" (320mm) Boring In Cast Iron 10" (250mm)
Max. Machine Height (F) 157" (3990mm)  
Base and Column Height (G) 151.6" (2660mm)
Shipping Dimensions
(L x W x H)
158" (4000mm) x 63" (1600mm) x 151.6" (3850mm)
Net Weight 24,250 lbs. (11000kg)
Shipping Weight 27,557 lbs. (12500kg)